Your Vector, your way.

The Vector 3 and Micron from UPT are the most comprehensive, most feature rich and best-selling containers on the market. With a wide range of options to suit every user and every budget, we’ll make sure that your container is truly tailored to you.

Built in our ISO: 9001 certified factory, we ensure the highest quality of craftsmanship combined with the latest advancements in skydiving technology.

When you jump your Vector 3, you can do so knowing that you’re jumping the very best.

WHICH VECTOR FITS YOU?

Standard Features

Your brand new Vector 3 comes loaded with lots of great features, including: Standard Deluxe Backpad, Magnetic Riser Covers, one piece Leg Pads, standard or low profile metal D Handle, soft Cutaway Handle, plastic deployment handle and your choice of colors.

Want to make it a bit more special? Check out our most popular options.

We know how important it is that your gear is as unique as you are. That’s why we offer a range of options for your Vector 3.

You can see our most popular ones below, or find out more about all of the different options by clicking here.

Vector Anatomy 101

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Understanding the parts of a harness container system
1

RISER COVERS

Flaps that go over your shoulders to protect your risers in freefall to prevent out of sequence deployments. The Vector system uses magnets to help secure these flaps and allow for even deployments.

2

YOKE

The piece that curves around your collar, extending down the front over your shoulders. This measurement is used in determining harness fit. For example, a +1 yoke would be built for someone with above average shoulder size. Read about our contoured yoke design in #16.

3

RESERVE PIN COVER

Flap that covers your reserve pin. You should always check your reserve pin when doing gear checks! Under this flap is also where your AAD window is.  On the Vector, this is the most popular flap for custom embroidery, as it is relatively easy to replace for resale.

4

SECONDARY / INTERNAL RISER COVERS

Flaps along the sides of the reserve tray to protect the risers during freefall. This added protection is one of the many reasons why the Vector is the most popular container amongst free fliers.

5

RESERVE TRAY

This is where your reserve canopy is positioned. If you have noticeable wrinkles, or you can see the ring of your reserve pilot chute showing when packed, you should ask your rigger for a repack, as that can create “memory” in the fabric and have lasting effects on the appearance of your container.

6

MAIN TRAY

This is where your main canopy lives when packed.  To maintain the appearance and longevity of your Vector, always take care to make sure your canopy completely fills the corners of the tray, and that you are not creating wrinkles when you pack. Also do not over stuff or under stuff your container.

7

MAIN PIN COVER FLAP

Protects your closing pin to prevent premature deployments. Vector is known for its superior pin protection, which makes it the most popular container for free flying.

8

BINDING TAPE / TRIM TAPE

The tape used to cover/bind the edges of all of the flaps of the container.  In this image, the binding tape shown is black with teal contrast stitching. Contrast stitching is an additional charge option, but adds a nice color highlight to your container.

9

SIDEWALL / SIDEBODY

The side flaps of a container.  This is a popular space for custom embroidery.

10

MAIN DEPLOYMENT HANDLE

The handle attached to the main pilot chute for deployment – can be various different styles: hackey, monkey fist, plastic handle (standard), or free fly pud. The freefly pud is the option shown on this container. For better security in freefall, we recommend adding the “freefly tab” to a hackey or monkey fist to help prevent premature openings (this tab comes standard on the freefly pud option).

11

RISERS

Connect your canopy to your container. Can be either type 17 webbing ( skinny ) or type 8 ( fat ) and come in various lengths depending on your size and canopy goals. UPT also offers Louie Loops, which are our reinforced front dive loops and low drag risers (sewn in half to reduce drag) as options for advanced canopy piloting. The low drag risers are what is shown here.

12

RSL – RESERVE STATIC LINE

The RSL connects your reserve ripcord to your main, so that your cut away main pulls your reserve pin automatically. UPT systems take this one step farther with a SKYHOOK, which essentially uses the connection to your main as your reserve pilot chute for fastest possible reserve extraction.

13

3 RING RELEASE

System for releasing malfunctioning main.  We invented this! This is the release system used on all sport parachuting systems today.

14

HARDWARE

Vector containers come standard with stainless steel hardware.  You can also upgrade to black stainless steel for a bit more of a stealthy look (shown here).

15

BREAKAWAY HOUSINGS

The metal housings the cutaway and reserve ripcord cables are fed through to protect them and also ensure a smooth release of the main canopy in the event of a malfunction.

16

CONTOURED YOKE

The Vector contoured yoke allows for comfort without chest articulation. The contoured shape also keeps the yoke securely over your shoulders when flying in fast head down orientations.

17

RING COVER AKA MUDFLAP

These terms are used interchangeably for this flap, so when you are ordering your Vector, your dealer may refer to that flap as either term.

18

BACK PAD

 The back pad comes in a variety of styles for user comfort – 3d spacer foam, standard deluxe, Babylon, etc. The 3D spacer foam option is shown here.  Please visit our options guide for a break down of the various back pad options.

19

CHEST STRAP

People often opt for a longer chest strap to make it easier to lean forward in the harness for canopy piloting.

20

MAIN LIFT WEB (MLW)

Harness webbing along the sides of the torso. This is one of the biggest factors in harness fit.

21

CUTAWAY HANDLE

Handle attached to cables that releases a main canopy from the container via the 3 ring release system.

22

RESERVE HANDLE

Handle which deploys your reserve. Our reserve handles come in a variety of options (soft pillow handle shown here). Please see our Options Guide for more options.

23

BOC POUCH

Spandex pouch on bottom of container (*BOC) where the main pilot chute is stored.

24

VARIABLE GEOMETRY HARNESS / VGH 

– This added hip ring hardware gives flexibility and range of motion allowing the harness articulation at the waist. While you cannot see the hip rings in this image, they connect the leg straps to the main lift web (MLW). This is our most popular upgrade option.

25

LATERALS / STABILIZERS

The part of the harness that wraps around the waist connecting the container to the main lift web. These come in many configurations specific to the design and comfort of the skydiver. Check out our Options Guide for details.

26

LEG PAD VS LEG STRAP

Leg strap is the actual harness webbing, whereas the leg pads are the pads that cover the straps. Sizing is determined by leg pads.

Available Styles

You can have your brand new Vector 3 exactly how you want it with our range of container styles.

Want to see how each one would look with your colors? Check out our rig designer by clicking here.

Closely behind the three ring release system, the Skyhook RSL is one of the greatest skydiving innovations from our founder, Bill Booth.

Effectively using the malfunctioning main canopy as a pilot chute for the reserve, the Skyhook RSL dramatically speeds up the process of deploying a reserve canopy after cutting away a malfunctioning main canopy.

Due to the nature of its design, it is effective in both high, and low-speed malfunctions and is suitable for all types of jumping, including camera flying.

The Skyhook RSL is strongly recommended as an optional extra for all new Vector 3 containers.

Find out more about the Skyhook RSL by clicking here.

READY TO ORDER?

Available colors

Disclaimer:

*Due to color variances among monitors the colors that appear on your screen may not be exact. Please see your Dealer for color swatches.

*Kryptek Corduras (Mandrake, Highlander, Typhon and Raid) all have KRYPTEK logos “ghosted” in fabric that cannot be removed or replaced and are completely random within the pattern.

MEASURING / FITMENT

X